There are several methods of grinding and polishing. Here are some of them.
A method for rotating a workpiece while holding a rotary shaft and grinding the workpiece by a grinding stone rotating at a high speed in the workpiece
Method for grinding cylindrical workpiece by holding workpiece at center
It is the method that it has vertical axis and horizontal axis by fixing workpiece through magnet and processing plane with grinding stone.
It is a grinding method for molding grinding stone and transferring its shape to work. Any shape is possible if it can be molded
It is a grinding method in which the feed speed is reduced by deep cutting, and a large amount of grinding fluid is used
Regrinding with blade for drill, end mill, reamer, hob, etc
In this method, a workpiece and a master cam are rotated together on a rocking table, and the workpiece and the master cam are processed into a prescribed shape by rocking motion by the contact of the master roller and the master cam placed at a fixed position
It is a grinding method that an original drawing with a precisely enlarged workpiece shape, or a grinding method that processes with the grinding stone faithfully following the template, the machining shape is confirmed with a projector
In this method, a workpiece is put between a grinding stone and an adjusting stone (control stone) for feeding the workpiece, and the outer periphery of the workpiece is ground while being supported by a receiving plate (blade)
There are a feed-through method, a carrier (rotary) method, and a reciprocating method in a method for simultaneously grinding two parallel surfaces of a workpiece
GRINDING WHEEL
They are characteristic
grinding wheels with "PoreTec"
DIAMOND/CBN WHEEL
We have vitrified bond wheels
which accumulate long-time technique
GRINDING RELATED PRODUCTS
We can make a proposal for
the total grinding process.
